Now booking jobs across the Charleston area. Request a free estimate.

Charleston, SC & the Lowcountry

Charleston's surfacerestoration specialists.We remove the rust, not the iron.

We take off rust and old paint, along with graffiti, grease, oxidation and stains. Iron and steel, solid brass, brick, stone, concrete, wood trim and boat parts on land. Depending on the surface that means the laser, hand polishing, heat or sanding, and never sandblasting. Each job is dialed in on a test spot to take the coating and keep as much of the original as possible. Painted and stained wood is restored by hand.

Not sure if we can help? Send it anyway. Free estimates, with a reply within one business day.

Cast iron skillet covered in heavy rust before laser cleaning
Same cast iron skillet after laser cleaning, bare gray iron
AfterBefore

Cast iron skillet, test piece. Heavy rust removed with the laser, no sandblasting. Photo pair 1 of 3.

ANSI Z136.1
Laser Safety Officer, trained to ANSI Z136.1
$1M / $2M
General liability coverage
Mobile
On site, or on our bench for small parts
Free estimates
Quoted from photos, no obligation

Before and after

The same surface, before and after.

Curved wrought iron balcony railing with faded, peeling blue-green paint and rust
Before
The same curved balcony railing refinished in black, looking out over the marsh
After

Balcony railing, Daniel Island. Stripped, primed the same day, two coats of black.

Brass stair handrail post with a dull, tarnished finish and corrosion at its base on a marble step
Before
The same brass handrail post polished to a bright shine, with blue tape protecting the marble at its base
After

Lobby stair post, office building in North Charleston. Polished by hand, no laser.

The difference

Taking the coating off is the easy part. Keeping the original is the hard part.

Rust and old paint sit on top of the surface you're trying to keep. Any method takes rust off. What matters is what else it takes with it.

Laser cleaning
Dialed in on a test spot to take the coating and keep as much of the original metal as possible. Cleaned metal shows a matte finish.
Chemical stripping
Soaks in unevenly and leaves residue in the surface, with runoff to contain.
Sandblasting
Blasting media can cut into sound metal and soften fine detail, and the spent media has to be cleaned up.

Send a photo. Get an answer.

Not sure if we can help? Send it anyway. If it is work we do, you get a free estimate, usually within one business day. If it is not a fit, Tyler still looks at it and, where possible, points you to the right person. Serving Charleston, Mount Pleasant, North Charleston, Daniel Island, West Ashley, James Island, Summerville, Isle of Palms, Sullivan's Island and Folly Beach.

Request a Free Quote
Get a Free Quote